IMPORTANT FOR OWNERS OF '99-'03 MIATAS WITH AUTOMATIC TRANSMISSION!
Due to occasional variation in the mounting flange bolt-hole spacing on (some) automatic transmission cars, we are suggesting that you measure the (diamond) flange bolt-hole spacing prior to placing an order.
We request that you measure the flange bolt-hole spacing on your car to confirm that you will be obtaining the correct muffler for your application. The measurement of concern is the spacing of the bolt-holes on the (diamond) flange between the muffler and the end of the connecting pipe.
If your measurements match the specifications for “Auto Transmission”, then you will order muffler Part No. 2-56470.
If your measurements match the specifications for “Manual Transmission”, then you will order Part No 2-56467.
Click the inset illustration on the left to see a larger version of the location of the flange to check, and the dimensions of the two (2) types of flanges.
This fine piece of equipment has everything going for your Miata.
It's not too loud,...
...but loud enough to let everyone
know you mean business!
Meets California sound level requirements!
Designed entirely by Racing Beat, this muffler features stainless steel and ceramic sound-deadening insulation to provide the optimum exhaust note for your Miata. The Power Pulse Muffler for the Miata offer a deep, throaty exhaust note, without any harsh, buzzy or “droning” tones. All Racing Beat’s exhaust are “tuned” in-house by their engineering staff to produce a modest exhaust tone at low speeds, and a bit more “attitude” under full throttle acceleration!
The Racing Beat Dual Tip Muffler is produced entirely from 304 stainless steel for superior durability and appearance.
The inlet tube features a thick, cast-stainless steel flange that provides excellent gas sealing capabilities. Additional strengthening for the inlet and outlet tubes is provided by specially designed canister ends that eliminate the need for external bracing.
Each stainless steel outlet tube feeds into a double-walled tip for an aggressive and sporty look. The two 3.5-inch exhaust tips are manufactured using highly polished 304-stainless steel and are slightly oval in shape to provide a perfect balance and proportion with the Miata’s rear bumper. And each tip features a subtle, bead-blasted Racing Beat logo to add the finishing touch!
Each system comes complete with fully detailed instructions and mounting hardware, and can be easily installed by the weekend mechanic using only simple hand tools. A positioning template is provided to assist with cutting of the new opening for the additional outlet tip. The new opening can be cut through the soft urethane bumper material using only a small utility knife. A small sanding block is then required to “smooth” out the opening to the final shape. To download the installation instructions for review, click here.
Note: Exhausts systems are specific to transmission type. See details below, and make sure to make the correct selection for your Miata's transmission type.
IMPORTANT: Due to the size and weight of some products, some additional shipping charges (over and above standard shipping costs) are required to get the items shipped to you. This is nothing new - every Merchant applies additional shipping charges for extra heavy or over sized items. But get this: In order that you get to see these charges up-front, Raven Wing Performance has factored them into the shopping cart so that you can review your total “before” you submit your credit card info – Cool, eh?
Note: Due to the size and weight of this item when packaged, an additional $9.97 in shipping
charges will be added to the sales price of $359.95
